Skip to content
  • There are no suggestions because the search field is empty.

Why won't my compressor start?

What to do if your Display Panel is on, but your compressor does not start


  1. Set mode to Cooling (Snowflake icon) : Press the mode button and make sure the snowflake icon is on.
  2. Remove/access the back of the Display Panel and check that all connections are secure.
  3. Remove the top cover to verify that the screw/bolt connections to the compressor controller and compressor are tight. Also, check that the white connectors on the compressor controller are connected tightly.
  4. Make sure the ambient temperature is 67 F or above, and that the set temperature is set about 10 degrees below the ambient temperature. Wait for the unit to run for 10 minutes. Sometimes the compressor has a delayed start to equalize inside pressure as well as prevent short-cycling.
If the issue persists, call Support to replace the display panel